Как установить cisco anyconnect на mac os

IT Helpdesk

All IT systems (including email, Blackboard, myOleMiss, etc.) are unavailable 5-7:30 AM every Friday morning in order to perform scheduled maintenance. See calendar for any schedule changes.

Maintenance Calendar

Useful links

• Remote Assistance
• Password Change Form
• Departmental Software Request
• Virus/Spyware Removal

Cisco AnyConnect VPN Installation for Mac OS X

Installation and Setup Instructions for Mac OS X:

Step 1:

Download the software and open with default DiskImageMounter.

Step 2:

Double-click the AnyConnect.pkg (or Cisco Secure Client.pkg) icon.

Step 3:

Continue through the installation screens, agreeing to the conditions stated.

Step 4:

Uncheck any applications you do not want to install. VPN is the only necessary one.

Step 5:

Proceed with installation and verify your Touch ID or password when needed.

Step 6:

When installation is complete, click Close and then Move to Trash to unmount the installer.

Step 7:

When you are ready to begin a VPN session, locate the application to run it.

Step 8:

Enter «vpn.olemiss.edu» and click Connect. You will be asked for your WebID credentials. If you have 2-factor authentication setup, you’ll need to respond to that also,

Step 9:

The first time you run the VPN application, you may need to enter the computer’s password to allow it to use your keychain.

Step 10:

The AnyConnect icon in your status menu will reflect your VPN connection status. To end your VPN session, click the icon and select Disconnect.

Links to Other IT Groups

• Classroom Technology
• Faculty Technology Development Center
• IT Labs
• IT Media
• IT Security
• IT Training
• SAP at Ole Miss
• TECHNews
• Telecommunications Center
• VPN Help
• Wireless Service Support

Install and Configure the Cisco AnyConnect Software VPN on a Mac

NOTE: If you have an FBRI-provided Mac, the Cisco Anyconnect Client is already installed. Please skip to Starting the VPN Client below.

Installing the VPN Client

1. Download the AnyConnect VPN client for Mac OS X.
2. In your Downloads folder, double-click the file you just downloaded to open it. An icon will appear on the desktop called AnyConnect, and a separate window will open.
3. Double-click on AnyConnect.mpkg to run the installer, then follow the steps to complete the installation.
4. When you see this screen, UN-check everything with the exception of VPN: (VPN option grayed out? Go here.)
   • Starting with macOS 10.13 High Sierra: During the installation, you will be prompted to enable the AnyConnect software extension in the System Preferences -> Security & Privacy pane. The requirement to manually enable the software extension is an operating system requirement.

Starting the VPN Client

NOTE: The VPN will not connect if you are connected to the FBRI wired or wireless network.

1. In your Applications folder, go to the Cisco folder and double-click the Cisco AnyConnect Secure Mobility Client.
   
2. Enter vpn.vtc.vt.edu in the Ready toConnect to field, then press the Connect button.
3. Make sure AnyConnect-VPN is selected for the group.
4. Enter your FBRI usernameand password, then click OK.
5. A banner window will appear. Click Accept to close that window. You are now connected!

Disconnecting the VPN Client

When you are finished using the VPN, remember to disconnect (failing to disconnect can result in being unable to access resources if you are on-site at the Research Institute).

1. Click the AnyConnect client icon located in the menu bar near the top right corner of your screen.
2. Select Quit.

Как установить cisco anyconnect на mac os

Recommended in China and in the Middle East countries

Written by Richard
Updated over a week ago

Step 1

Then double click on AnyConnect.pkg to start the installation process.

Step 2

Click Continue.

Accept End User License Agreement to proceed.

Step 3

Untick all other packages except for VPN. Click on Continue.

Click Install to proceed.

Step 4

Enter your password for the Mac account (not VPN password) and then click Install Software.

Step 5

Go to Applications. Open Cisco folder.

Open AnyConnect Secure Mobility Client app.

Step 6

Enter your preferred VPN server address on the field and then click Connect.
*you’ll find the server list here.
For this guide, we will select a Hong-Kong based server.

Step 7

Enter your PrivateVPN registered email address for the username.

RV34x: Install Cisco AnyConnect Secure Mobility Client on a Mac Computer

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Objective

This article shows you how to download and install the Cisco AnyConnect Secure Mobility Client version 4.10.x on a Mac Computer.

This article is ONLY applicable to the Cisco Small Business RV34x series routers, not Enterprise products.

Introduction

AnyConnect Secure Mobility Client is a modular endpoint software product. It not only provides Virtual Private Network (VPN) access through Secure Sockets Layer (SSL) and Internet Protocol Security (IPsec) Internet Key Exchange version2 (IKEv2) but also offers enhanced security through various built-in modules.

AnyConnect Software Version

• AnyConnect — v4.10.x (Download latest)

Install AnyConnect Secure Mobility Client

Beginner Information

This toggled section provides details and tips for beginners.

Prerequisites

• AnyConnect is a licensed product. You need to purchase client license(s) from a partner like CDW or through your company’s device procurement. There are options for 1 user (L-AC-PLS-3Y-S5) or packets of licenses including one year for 25 users (AC-PLS-P-25-S). Other license options available as well, including perpetual licenses. For more details on licensing, check out the links in the Licensing Information section below.
• Download the latest version of firmware available for your router.(Click here for step-by-step instructions on this process.)
• Make sure your operating system has one of the following versions: macOS 11.x (including Big Sur when using the latest version of AnyConnect firmware), 10.15, 10.14, and 10.13 (only 64-bit is supported from 10.15 and later). If you are not sure if a macOS version is supported, you can check the release notes. View the release notes from May 2021.

Check these other articles out!

• Install AnyConnect on Windows
• Installing and Using AnyConnect on Ubuntu Desktop
• Installing and Using AnyConnect on Ubuntu Desktop using the User Interface

Applicable Devices | Software Version

• RV340 | 1.0.03.21 (Download latest)
• RV340W | 1.0.03.21 (Download latest)
• RV345 | 1.0.03.21 (Download latest)
• RV345P | 1.0.03.21 (Download latest)

Licensing Information

AnyConnect client licenses allow the use of the AnyConnect desktop clients as well as any of the AnyConnect mobile clients that are available. You will need a client license to download and use the Cisco AnyConnect Secure Mobility Client. A client license enables the VPN functionality and are sold in packs of 25 from partners like CDW or through your company’s device procurement.

Want to know more about AnyConnect licensing? Here are some resources:

• Cisco RV340 Series and Cisco Anyconnect Secure Mobility Client Community Discussion Forum.
• AnyConnect Licensing FAQs.

Step 1

Open a web browser and navigate to the Cisco Software Downloads webpage.

Step 2

In the search bar, start typing ‘Anyconnect’ and the options will appear. Select AnyConnect Secure Mobility Client v4.x.

Step 3

Download the Cisco AnyConnect VPN Client. Most users will select the AnyConnect Pre-Deployment Package (Mac OS) option.

• The images in this article are for AnyConnect v4.10.x, which was latest version at the time of writing this document.
• If you purchased a license and you are unable to download AnyConnect, call Cisco Global Service Relations at +1 919-993-2724. Select option 2. You will need to know your Cisco ID (the one you use to log into Cisco.com) and the sales order number when you call. They will get that situation all straightened out.

Step 4

Double-click the installer.

Step 5

Click Continue.

Step 6

Go over the Supplemental End User License Agreement and then click Continue.

Step 7

Click Agree.

Step 8

Choose the components to be installed by checking or unchecking the corresponding check boxes. All components are installed by default.

The items you select in this screen will appear as options in AnyConnect. If deploying AnyConnect for end-users, you may want to consider deselecting options.

Step 9

Click Continue.

Step 10

Click Install.

Step 11

(Optional) Enter your password in the Password field.

Step 12

Click Install Software.

Step 13

Click Close.

You have now successfully installed the AnyConnect Secure Mobility Client Software on your Mac computer.

Additional Resources

AnyConnect App

To try out AnyConnect on mobile devices, the App can be downloaded from Google Play store or Apple store.